Skip to main content

How to avoid star trails during night photography using 500 rule?

What is a star trail? Movement of star captured across several pixels of a given image leads to the formation of a star trail. This is a really common problem when doing long exposure night sky photography or astrophotography. Pretty sure most of us like to star gaze and observe those tiny little twinkling dots in the sky on a clear day. If our eyes can see it, so why not our DSLR? We want exact same tiny cute little stars to show up in our DSLR photos too. Once you have learned how to focus your DSLR lens to infinity, next thing to think about is how to avoid light pollution and star trails. 500 rule or 600 rule comes to the rescue when learning to avoid star trails. I have seen a lot of discussions about 500 rule vs 600 rule, I personally have always been happy with 500 rule only. Sometimes I even go for 400 rule but never 600 rule.
Who invented this rule? I did search but couldn't find anything relevant or meaningful. Only thing I know is all modern day astrophotography folks love this rule. I will try to explain the rule with two simple examples. If you are shooting RAw images, I would highly recommend turning off Long Exposure Noise Reduction in your camera settings menu. 

1) Canon T5i (cropped sensor) camera. 
Lens used: Tokina 11-16 F2.8 DX at 11 mm. 
ISO: 3200
F-stop: F2.8
Shutter speed:
Maximum shutter speed possible to avoid star trails: 500 divided by full frame equivalent focal length. So it is 500/(11*1.6) which gives us approx 28 seconds. 1.6 is the crop factor for Canon cropped sensor cameras, you can use 1.5 for Sony and Nikon cropped sensor cameras.

Star trails avoid during MIlky way photography
                                                                  20 seconds exposure 

2) Nikon D610 (full frame sensor) camera. 
Lens used: Tokina 16-28 F2.8 FX at 16 mm. 
ISO: 3200
F-stop: F2.8
Shutter speed calculation:
Maximum shutter speed possible to avoid star trails: 500 divided by full frame equivalent focal length. So it is 500/16 which gives us 31.25 seconds. In this case, I would use 30 seconds to be on the safe side. Take a few test shots and check your image by zooming in. If you see every star looking well rounded and crispy, you have taken an awesome shot. If not, try again with a bit lower shutter speed. You might get lucky to see a couple of shooting stars in your photos which adds more interest to the pictures. 

Hope this post would help you to take stunning and crispy star shots without any surprise star trails. If you like star trails, there will be a separate post talking about cool star trail formation ideas around the north star. 

If you found this post helpful, share the photography love by sharing this post. :)


  1. Thanks for the post. That was a big help. Will try it as soon as I get hold of an appropriate lense.

  2. Photograph clicked is amazing. I will surely try these lenses and your idea of photography.


Post a Comment

Popular posts from this blog

sRGB vs Adobe RGB colour space explained

Digital images are everywhere, both offline and online. Each digital image is made up of a large number of square sized individual pixels. Zoom into an image at 2000 % or more in any of the viewers, you will see these pixels. Here is an example:

In order to categorize pixel colours, RGB and CMYK are the two widely used colour models. According to the RGB colour model, each pixel colour can be considered as an addition of different shades of red/green/blue light. These light shades are calculated according to the bit depth of the image. Jpeg images are usually 8 bits per colour channel (red, blue or green), which means 2^8 ( 256) different shades of each red/blue/green colour are possible. Few examples to make it clear how different colours shades are represented:
Red: (255, 0, 0)
Green: (0,255,0)
Blue: (0,0,255)
White: (255, 255, 255)
Black:  (0,0,0)

What does CMYK do? It is a subtractive colour model for printing purposes and stands for Cyan, Magenta, Yellow and Black. According to …

Digital photography histogram explained for better photos

The ability to read histograms in digital photography is an excellent skill that every photographer should have. Getting a properly exposed shot is crucial when it comes to photography, and using the histogram is a solid way to achieve it. That 2 to 3 inch LCD screen located on digital cameras is only a quick way to look at the photo exposure and its details. In harsh lighting or vivid ambient lighting conditions, it can prove to be misleading to the human eye. Sometimes the LCD brightness level can also create issues with judging the exposure of a shot. So what does histogram explain about an image? How can histogram help you to take better images? In this beginner-friendly post, I will try to answer these questions. You can consider it as a tutorial or cheat sheet for digital photography histograms.
Photography histogram image examples: The histogram is basically a mathematical way of representing data, and it applies to digital image information too. In digital photography, histogr…

Darktable vs Lightroom Classic CC

I first heard about Darktable software in 2016 and actually was quite fascinated with the name itself.  Within a few hours of hearing about it, I went to the official Darktable website and downloaded it on my Linux machine. Have been using it for quite a while now alongside Adobe Lightroom Classic CC and hence decided to write this small review post. If you are looking for a free Adobe Lightroom alternative, this might be or might not be for you depending on what you need.  Darktable is a free open source post-processing software which can do non-destructive RAW photo editing and photo management. Non-destructive means it does not change the original RAW file, all the edits are written to a sidecar file. It has evolved through so many phases of bug fixing and operating system compatibility. The latest version is available for Linux, MacOS, and Windows. Being an open source software it doesn't surprise me that it is available in 21 language translations. That's the power of op…